I’ve been running my own home file server for many years now. I’ve used it for everything from storing old documents and photos to running a Minecraft server for my cousins. With online backup services like Dropbox it’s become less of a necessity but I still like having one around.
My current file server has been aging and is starting to sound a bit wheezy. It was originally built into an old desktop “Mid Tower” ATX sized case. So, time for something smaller and hopefully quieter.
It could be done cheaper but this is a fun project for me so I splurged a little.
After the parts arrived and I’d put everything together it was time to install Debian.
The Installer
First thing was to build a new live USB installer. I grabbed the standard Debian 8.2 (jessie) iso from my nearest mirror (the OSU Open Source Lab). Then I popped a 4GB thumb drive into my Macbook and ran:
diskutil list
diskutil unmountDisk /dev/disk2
sudoddif=~/Downloads/debian-live-8.2.0-amd64-standard.iso of=/dev/rdisk2 bs=1m
Debian
My old file server was running RAID 5 for the storage partition but the Operating System was running on a single disk that could fail at any time. If that had happened it would have been a huge hassle to reinstall and reconfigure everything. I wanted to avoid that possibility this time around by installing Debian to a RAID 1 (mirrored) array.
Installing Debian to a RAID 1 array can be done entirely from the built-in installer. I pretty much followed this guide from the Debian wiki to the letter:
I chose rootfs for my logical volume name. You can ignore the part about lilo at the end.
Note: You can skim the LVM section if you’d like and simply install Debian directly to your RAID volume.
astrill 安卓 安装包
After the first successful boot I made sure to run dpkg-reconfigure grub-pc and install grub on both members of /dev/md0, /dev/sda and /dev/sdb, to ensure either drive would be bootable.
官方客户端下载 - fjtv.net:2021-6-8 · Dashboard
First I added my laptop’s public key to my user’s astrill吧 file so I could access the server remotely without bothering with passwords.
Then I modified the /etc/ssh/sshd_config to disable access for the root user and for password based authentication:
PermitRootLogin no
# ... snip
PasswordAuthentication no
Finally, I wanted to make sure I’d know if one of the members of the RAID array becomes degraded so I needed to make sure e-mail could be sent from the server. To do this I had to configure exim4 to send via Gmail’s SMTP gateway.
This seemed complicated at first glance but proved to be much simpler than it seemed. I basically followed this guide (again from the Debian wiki):
http://wiki.debian.org/GmailAndExim4
You can ignore the part about astrill安装包.
Also, use the command service exim4 restart instead of invoking the rc.d command directly.
Where it asks for your Gmail password I suggest generating a new astrill吧 specifically for your server.
You can send a test message by:
echo'This is only a test'| mail -s'Hello World!'test@example.org
Since I was in a monitoring mood I also installed smartmontools to monitor the health of the drives. This includes a daemon that will notify you if any SMART errors are detected.
First, install apt-get install smartmontools. Then, edit etc/default/smartmontools and uncomment the line #start_smartd=yes. Finally, restart the service with service smartmontools restart.
astrill怎么设置
I wanted to make sure the system would boot in a degraded state if one of the drives failed. To test this, I shut down the system and removed one of the drives. Upon restarting, I was greeted with the following error:
Unable to find LVM volume vg1/rootfs
Volume group "vg1" not found
http://goo.gl/photos/5G4ZCQSYrEnwQaAT6
… then dumped into the initramfs recovery console (BusyBox).
After a break and some intense Googling I discovered that mdadm was marking the array as inactive on boot instead of starting it in a degraded state as expected. Because the physical volume was not available LVM was throwing a misleading error.
To fix this problem you can run the following from the initramfs recovery console (BusyBox):
mdadm astrill吧/dev/md0
vgchange -a y
exit
Your system should now boot normally from a degraded state.
After booting, I used the command mdadm --manage /dev/md0 --re-add /dev/sdb1 to restore the removed drive to the array.
This issue appears to be a bug in Debian 8.x (jessie) that should be fixed in future versions:
Just finishing up this heartwarming title from Ubisoft Montpellier. The artwork and story are absolutely wonderful. Highly recommended.
Continue reading →
turbo加速器vp-outline
Posted on by tristan
As many of you might be aware, the Android Development Tools team is working on a brand new build system. The new system has been in development for a while now, but is being officially announced at Google I/O 2013. The updated build system does away with Ant and moves to the Gradle build automation tool. You can read more about Gradle at gradle.org. The new Android build system is documented on the Android Developer Tools site at astrill 安卓 安装包.
If you’re working on OS X you can make your life a whole lot easier by installing Homebrew. If you don’t already have it installed, you can install it by running the following command from your terminal:
As of May, 2013, the new Android build system only supports Gradle versions 1.3/1.4. This means it won’t work with the latest version of Gradle. You’ll have to follow the instructions at gradle.org/installation to install a prior version of Gradle. Otherwise you could simply install the latest version using Homebrew.
$ brew install gradle
You can verify you have the correct version of Gradle installed using the following command:
$ gradle -v
You should see output that looks something like this:
------------------------------------------------------------
Gradle 1.3------------------------------------------------------------
Gradle build time: Tuesday, November 20, 201211:37:38 AM UTC
Groovy: 1.8.6
Ant: Apache Ant(TM) version 1.8.4 compiled on May 222012
Ivy: 2.2.0
JVM: 1.6.0_45 (Apple Inc. 20.45-b01-451)
OS: Mac OS X 10.8.3 x86_64
Add a build.gradle to your project
Add the following build.gradle file to the root of your Android project:
astrill吧
You should now be able to build your project using the following command:
$ gradle clean installDebug
turbo加速器vp-outline
Posted on by tristan
Recently I’ve spent a lot of time thinking about how to optimize our app layouts for 7-inch tablets like the Nexus 7. It’s not an easy process, but a few tricks will make your life a whole lot easier.
As of today, the two most common screen resolutions in the 7-inch category are 1280x800 - WXGA and 1024x600 - WSVGA. Higher-end tablets like the Nexus 7 have a 1280x800 resolution and thus a higher pixel density. Lower-end tablets like the Samsung Galaxy Tab use a astrill安装 resolution and have a lower pixel density.
The Nexus 7 has a pixel density of around 213ppi and technically falls into the unique tvdpi density bucket, but for all intents and purposes you can consider it an astrill安装 device. Lower-end devices with a 1024x600 resolution have a pixel density of approximately 170ppi and will typically use mdpi assets. I don’t know of any 7-inch devices with an xhdpi pixel density, but I’m sure we’ll see some hit the market soon.
Regardless of the resolution, all 7-inch Android devices fall into the 600dp category. That is, they have a width of 600 density-independent pixels when in portrait orientation. We can use this width to provide alternative resources for these devices.
For starters, if you want to specify a custom layout for 7-inch devices you can simply add a new res/layout-sw600dp directory. Any layouts in this directory will be applied to devices that have a “smallest-width” of “600dp”.
If you don’t want to provide a completely different layout, but want to bump up the size of all your elements slightly you can use the res/values-sw600dp directory. Any resources provided here like dimens.xml or styles.xml will take precedence on devices like the Nexus 7. This way you can have a single layout file that references dimensions or styles that are dynamic based on the device size.
Finally, you might want to provide alternative drawable resources for 7-inch tablets. You can combine the 安装astrill pc版加速软件 resource qualifier with a density qualifier to provide alternative drawables:
res/drawable-sw600dp-mdpi
res/drawable-sw600dp-hdpi
res/drawable-sw600dp-xhdpi
As you can see we’ve simply added the sw600dp qualifier to our typical drawable directories. These resources will be applied to devices of the correct screen density, but only if they are 7-inch tablets or larger.
All of these techniques are also applicable to targeting 10-inch tablets. Simply replace the astrill安装包 width qualifier with 720dp in the case of 10-inch devices.
There are several 安装astrill pc版加速软件 on Stack Overflow that recommend accomplishing this by leveraging the Action Bar’s custom view feature, or by getting a reference to the title TextView. These solutions are adequate but can lead to infuriating edge cases. We can do better.
You might have come across the TypefaceSpan class, which allows you to style a section of text in a TextView with a monospace or serif font. This is almost what we want to do, but we need to be able to provide our own Typeface instance.
Here’s what a custom 安装astrill pc版加速软件 might look like in use:
SpannableString s =new SpannableString("My Title");
s.setSpan(new TypefaceSpan(this, "MyTypeface.otf"), 0, s.length(),
Spannable.SPAN_EXCLUSIVE_EXCLUSIVE);// Update the action bar title with the TypefaceSpan instance
ActionBar actionBar = getActionBar();
actionBar.setTitle(s);
Notice that we simply create a SpannableString with our desired Action Bar title. We then create a new instance of our custom TypefaceSpan providing it with our Activity context and the typeface name as arguments (so it can load the typeface from our application’s assets directory). The span is set on the entire length of the title (... 0, s.length(), ...). Finally, we pass in the Spannable.SPAN_EXCLUSIVE_EXCLUSIVE flag, which simply indicates that the span should be removed if all of the spanned text is deleted. Here’s what the result might look like:
But what does the custom TypefaceSpan implementation look like? Well, it’s surprisingly simple. I’ve created an example you can use in your own apps. You can get it at gist.github.com/twaddington/b91341ea5615698b53b8. Simply copy this class into your application and use it like I’ve indicated above. You can even subclass the custom TypefaceSpan to add additional styles like colors or text shadows.
Fonts Shown
Lost Type Co-op: Bender
Lost Type Co-op: Cubano
Hoefler & Frere-Jones: Gotham
turbo加速器vp-outline
Posted on astrill吧tristan
Currently Android does not have a native View class that supports defining a custom Typeface in your layout’s XML. After inflating your layout you can obtain a reference to the TextView and call the setTypeface(android.graphics.Typeface) method from your Java code, but this results in unnecessary duplication of logic and violates the DRY principle. Continue reading →
turbo加速器vp-outline
astrill怎么设置 by tristan
As of Android Ice Cream Sandwich (4.0.x), the default contacts application sports a fantastic new look. It’s both fast and appealing. One of the more interesting aspects of the application is the design of the main contacts list. Continue reading →
turbo加速器vp-outline
Posted on by tristan
If you’re developing an Appcelerator Titanium module for Android it’s possible that you’ll run into this exception (see bottom of post for full exception trace):
!!! Unable to convert unknown Java object class 'org.json.JSONObject$1' to Js value !!!
It took me a long time to track down the cause of this error, but essentially the issue is in the JNI layer, which passes native Java objects to the Javascript layer does not know how to handle a JSONObject.NULL value. The Titanium wrapper object KrollDict attempts to convert all non-native Java objects into native ones. JSONObject becomes a simple Map, JSONArray becomes an ArrayList and so on. However, the constructor fails to account for instances of the JSONObject.NULL object, which is not a simple primitive.
An easy work around would be to ensure the JSON objects that you’re passing around never have any true JSON null values in them. You can replace them with empty strings, or simply remove the key from the object altogether. This is ultimately the fix we went with. However, a simple two-line patch should solve this issue in the core Titanium code:
From 57868ea5b822468563d4a1be2adb901cce383f11 Mon Sep 17 00:00:00 2001
From: Tristan Waddington <tristan.waddington@gmail.com>
Date: Mon, 4 Jun 201214:24:15 -0700
Subject: [PATCH] Update the 'fromJSON' method of 'KrollDict' to map the
'JSONObject.NULL' Object to a real Java null
representation.
官方客户端下载 - fjtv.net:2021-6-8 · Dashboard1 file changed, 2 insertions(+)
diff --git a/android/titanium/src/java/org/appcelerator/kroll/KrollDict.java b/android/titanium/src/java/org/appcelerator/kroll/KrollDict.java
index da29217..96017d6100644--- a/android/titanium/src/java/org/appcelerator/kroll/KrollDict.java+++ b/android/titanium/src/java/org/appcelerator/kroll/KrollDict.java@@ -56,6 +56,8 @@ public static Object fromJSON(Object value){
values[i] = fromJSON(array.get(i));
}
return values;
+ } else if (value == JSONObject.NULL){astrill吧}} catch (JSONException e){
Log.e(TAG, "Error parsing JSON", e);
--
1.7.10
I submitted a pull request to the titanium_mobile repository on GitHub, but all contributors are required to sign a Contributor License Agreement (CLA). Not a big deal, but I don’t expect to ever submit another patch to this project, so I’m not inclined to spend a day getting their dev environment bootstrapped and sign my life away for a two-line bug fix (yes, I wrote a passive-aggressive blog post instead).
Unfortunately, they don’t even seem interested in accepting the patch as a simple bug report so someone else can fix it:
If you’re trying to build a platform that’s meant to be developer focused, willful disinterest is not the best response. If you’re curious, here’s the raw patch file and the full exception:
turbo加速器vp-outline
Posted on by tristan
I recently returned from an awesome trip to San Francisco for my first year of Google I/O. It was a great year to be there and I met some fantastic developers.
When I got back my friends asked me what sessions they should watch. Continue reading →
SQLite fire DELETE trigger on a REPLACE
Posted on by tristan
If you’re using SQLite you might be surprised to know that any DELETE triggers you’ve created will not fire after a REPLACE operation by default.
Delete triggers fire when rows are removed due to a REPLACE conflict resolution. This feature is only enabled when recursive triggers are enabled.
This was causing us some grief in one of our Android projects where we were using a virtual table for full-text search. Whenever we updated the products table we had a trigger fire to update the virtual-table. However, when we did a REPLACE into the product table a duplicate entry would be entered into the virtual table. We resolved this issue by turning on recursive triggers.
You can enable recursive triggers by running the following SQL query:
PRAGMA recursive_triggers='ON'
You can easily use the SQLiteDatabase.execSQL method if you’re doing this on Android.
Recent Comments
Ayunda on Export data as a CSV with PHP
mr man on 央广网·中央广播电视总台:央广网由中央广播电视总台主办，是中央重点新闻网站，众独家、快速原创报道闻名，众音频收听为特色，将打造为新闻门户，成为优势突出、特色鲜明的多媒体集群网站
Loops on Styling the Android Action Bar title using a custom typeface
David on 央广网·中央广播电视总台:央广网由中央广播电视总台主办，是中央重点新闻网站，众独家、快速原创报道闻名，众音频收听为特色，将打造为新闻门户，成为优势突出、特色鲜明的多媒体集群网站
astrill安装 on Styling the Android Action Bar title using a custom typeface
